NABL TC-14144 — Report Formats
Sample NABL Test Reports — What You Receive From NKMPV
Every NKMPV deliverable carries NABL accreditation under ISO/IEC 17025:2017 (TC-14144). Below is the standard structure of our reports for each priority service. Anonymized sample reports are available on request — specify the service when you contact us.
Procurement teams, DPR consultants and project engineers regularly ask for a sample report before commissioning a new test programme — partly to verify the deliverable structure, partly to confirm acceptance by their target accepting agency (NHAI, BRO, state PWD, BoT operator). This page describes the structure of our reports for each priority service so reviewers can confirm fit before requesting an anonymized sample. Reports are issued in NABL-accredited form (NKMPV TC-14144, ISO/IEC 17025:2017) with all underlying calibration certificates attached as appendices.
Anonymized sample reports remove project-identifying data (client name, location, chainage range) while preserving the full structural and methodological content. Custom-format samples can be prepared for specific client templates or tender-prescribed report structures — mention the requirement when requesting.
IRC SP 16, MoRTH RW/NH-33044/32/2019
NSV (Network Survey Vehicle) Survey — Sample Report Structure
Accepting agencies: NHAI, BRO, state PWDs, BoT/HAM concessionaires
Typical report length: 40-120 pages depending on corridor length
Service page: View service details →
Standard report contents:
- Executive summary with overall acceptance verdict per IRC SP 16 thresholds
- Survey methodology and equipment specification (laser profiler, downward camera, DGPS, IMU)
- Per-100-metre IRI tabulation with statistical summary (mean, 85th percentile, std deviation)
- Rut depth tabulation per left and right wheel path with severity flag
- Cracking maps with type-severity-extent classification per IRC SP 16
- Mean Texture Depth (MTD) compliance check against IRC SP 16
- Road geometry summary (gradient, crossfall, curvature) with drainage flag
- GIS shapefile (.shp + .dbf + .shx) for NHAI PMS integration
- GeoJSON output for web mapping
- Chainage-synchronised forward and 360 video files
- Maintenance recommendations with intervention type per segment
- NABL accreditation certificate (TC-14144) appendix
IRC 115, ASTM D4694
FWD (Falling Weight Deflectometer) Pavement Test — Sample Report Structure
Accepting agencies: NHAI, state PWDs, World Bank-funded overlay-design programmes
Typical report length: 30-80 pages per corridor
Service page: View service details →
Standard report contents:
- Executive summary with overlay-thickness recommendation per chainage segment
- FWD field methodology and equipment specification (load plate, geophone configuration)
- Raw deflection-basin tabulation per test point (D0 through D9)
- Pavement-temperature normalisation appendix to 35°C reference
- Back-calculated layer moduli per test point (BC, DBM, GB, GSB, subgrade)
- Effective Structural Number (SN_eff) computation per IRC 115 / AASHTO methodology
- Projected traffic loading in MSA for the design period
- Overlay-thickness recommendation table with material specification
- GIS map overlay showing thickness contours
- Remaining service life estimation per section
- NABL accreditation certificate (TC-14144) appendix
IRC SP 19, MoRTH DPR Manual
DGPS Topographical / Highway Alignment Survey — Sample Report Structure
Accepting agencies: NHAI, state PWDs, DPR consultants, World Bank / ADB programmes
Typical report length: 20-60 pages plus AutoCAD .dwg + GIS shapefiles
Service page: View service details →
Standard report contents:
- Executive summary with project coverage map and accuracy claim
- Survey methodology with receiver, antenna, and base-station specification
- Permanent control-point coordinate list with adjusted-network solution
- Network adjustment report with baseline-residual and standard-deviation tabulation
- AutoCAD .dwg drawings with centerline, edges, structures, drainage, utilities
- GIS shapefile (.shp + .dbf + .shx) and GeoJSON for downstream integration
- Cross-section drawings at 25/50/100 m intervals as project requires
- Longitudinal profile of centerline with chainage-elevation tabulation
- Datum and coordinate system declaration (typically WGS84 / UTM)
- Calibration certificates of GNSS receiver and antenna (NABL-traceable)
- NABL accreditation certificate (TC-14144) appendix
IRC SP 51, IS 1915, IRC 6, IRC 112
Bridge Load Test (Static / Dynamic / Combined) — Sample Report Structure
Accepting agencies: NHAI, BRO, state PWDs, BoT/HAM concessionaires, Indian Railways
Typical report length: 40-100 pages per span tested
Service page: View service details →
Standard report contents:
- Executive summary with structural-adequacy verdict and load-class certification
- Pre-test inspection report with photographic record of existing distress
- Design-document review with critical-section identification
- Load calculation per IRC SP 51 with proof-load determination
- Instrumentation map (LVDTs, dial gauges, strain gauges, crack-width microscopes)
- Calibration certificates for all instruments and load sources (NABL-traceable)
- Staged load application log (25%, 50%, 75%, 100% of proof load) with timestamp
- Deflection vs load curve at all measurement points
- Strain vs load curve at maximum-stress sections
- Crack-width measurements before, during and after load application
- 24-hour recovery monitoring tabulation with residual deflection
- Acceptance interpretation against IRC SP 51 / IS 1915 thresholds
- NABL accreditation certificate (TC-14144) appendix
IS 516, IS 1199, IS 14959
Concrete Cube & Core Testing — Sample Report Structure
Accepting agencies: All construction agencies (NHAI, CPWD, state PWDs, RMC plants, builders)
Typical report length: 4-12 pages per batch / per project
Service page: View service details →
Standard report contents:
- Sample identification table with cast date, test date, mix design reference
- 7-day and 28-day compressive strength results per IS 516
- Statistical summary with mean, standard deviation, characteristic strength
- Acceptance interpretation against grade specification (M20, M25, M30, M40, etc.)
- Failure-mode classification (typical, shear, split, columnar)
- Photographs of tested cubes with crack patterns
- Calibration certificate of compression-testing machine (NABL-traceable)
- NABL accreditation certificate (TC-14144) appendix
IS 2720 (Parts 1 through 41 as applicable)
Soil Testing (CBR, MDD/OMC, Atterberg Limits) — Sample Report Structure
Accepting agencies: NHAI, state PWDs, PMGSY, geotechnical consultants, structural engineers
Typical report length: 6-20 pages per sample / per project
Service page: View service details →
Standard report contents:
- Sample identification with chainage / borehole reference, depth, sample condition
- Soil classification per IS 1498 with grain-size distribution and Atterberg limits
- Moisture content (natural and at test) per IS 2720 Part 2
- Maximum Dry Density and Optimum Moisture Content per IS 2720 Part 8
- CBR test results (soaked and unsoaked) per IS 2720 Part 16
- Subgrade modulus and IRC 37 design-input correlation
- Photographs of sample preparation and test setup
- Calibration certificates of test equipment (NABL-traceable)
- NABL accreditation certificate (TC-14144) appendix
Ready to Commission a Test? Request a Sample Report First.
Anonymized sample reports for any of our priority services. Custom-format samples available for tender-specific report structures. NABL-accredited deliverables under TC-14144 (ISO/IEC 17025:2017).
Request a Sample Report